Everything You Need To Know About Fixing It

Tires are the most used part of your vehicle and get ruggedly abused every other day. From screws to shards of metals and nails, anything sharp and pointy can easily puncture your tire and become a cause of panic. A screw or nail in your tire are both very common situations you can come across, and you may think that these situations are the same, but that is not the case. If you are dealing with a nail puncture, then the solution is easy; simply pull the nail away from the tire, and it will come out without a fuss. But with a screw, things can get tricky; screws have an irregular shape and have a toothed structure. If you pull out a screw, you need to learn how to do it right without further damaging the tire. So learn everything about screw in tire and how to tell if someone put a nail in your tire down below.

What Will Happen If Screw Is In Tire?

Tire punctures are very easy to deal with and can easily be fixed. However, dealing with a screw-in tire is an entirely different situation and can get incredibly tricky if the screw is stuck in the sidewall of the tire. If this takes place, then continuing driving will ruin the entire tire, and you will have to replace it instead of simply covering the hole. So what happens when a screw gets in? Once a screw enters the surface of the tire, it automatically creates a hole, and as long as the screw remains inside, there is no leak whatsoever. But the issue arises when the tire moves and rotates, this makes the screw rub against the tire hole and allows it to get bigger and bigger with each rub. This leads to either the hole becoming incredibly large that the entire tire will need replacement, or the tire will blow up and burst. Therefore, to avoid these two situations, it is important to make sure you avoid screws, nails, and any other sharp object when driving your car. But how do these pesky screws get stuck in your tire; read on below to find out!

How To Tell If Someone Put A Screw In Your Tire?

A screw can get in your tire in many different ways, and it can be difficult to determine how if you are not aware of these ways. One of the most common ways is through the environment, and keeping an eye around your tires before you start your car allows you to deal with it before it causes any damage. The three most common ways a screw can squeeze inside your tire include driving over it, through a wooden plank, or via sabotage.

Screws in Wooden Planks And Puddles

Getting a screw into your tire through a wooden plank is a common occurrence. These planks are risky because the screws remain upright, and once you drive over them, the screws have easy and quick access to your tires. Since the screw is exposed, it will penetrate into your vehicle's wheels, whereas the wood will break with the weight of the car. Another way screws can ruin your tires is when driving over puddles. Now, these puddles can become somewhat of a mystery since you won't know what is beneath them. If there are any screws present, then the puddle will allow them to rise with their tip towards the surface and can easily penetrate your wheels.

Driving Over Screws

Screws get into your tires when you drive over them, and this is a very common way. These screw-in tire situations usually take place on the back/rear wheels instead of the front ones. The reason behind this is that a screw is usually present on the ground in a vertical position, and when you drive past it, the front wheels will flip the screw making the pointed part facing upwards. So by the time the rear wheels will pass over it, it will easily penetrate in and get stuck.


Someone placing a screw in your tire and sabotaging your wheels is another common way of getting a bolt in tire. However, most of the time, a screw is not penetrated into the tire but kept right in front of it so that when you drive your car, it will penetrate right away. If you feel someone is sabotaging you, then make sure you look under your tires before driving and sweep around with your feet to ensure there is no risk.

I Have A Screw In My Tire – What to Do?

Once you have figured out what a screw-in tire can do and how it can get in there, let's find the solution to this dilemma. If you find a screw inside your tire, then you need to fix the situation right away. You can continue driving with a screw-in tire, but it is a better idea to avoid driving until and unless it is absolutely necessary or you are headed to a repair shop to fix this damage. To deal with a screw in the tire, you will need to provide it with immediate attention and even replace the tire with a spare one if possible. Driving with a damaged tire can make it risky and even a bumpy ride on a rough road. So continue reading and learn how to proceed and deal with a bolt in tire the right way.

How to Get the Screw-Out of the Tire and Repair the Tire

If you are thinking, "screw in tire, what do I do?" then fret no more. Simply start by removing the screw, and to do that, you have to pull it out. If you have a plier, then this will be perfect and easy; using the plier, you can grab the screw and pull it out. If the screw in tire tread is very deep, then use a sharp tool to carve and scrape out a small area around the screw. This will give you enough space to jam the pliers inside the tire, grab the screw head and pull it out. However, if the location of the screw damage is towards the side of the tire, then you will have to entirely replace it, and pulling it out won't do the trick.

Steps in Repairing Tire Punctures:

Even though removing a screw is a simple process with the help of a plier or sharp object, still it is best to deal with this issue by removing it from the car. This way, you can inspect the damage to its full extent and also repair the tire puncture; by following the steps below you can deal with a screw in tire fix on your own.
  1. The first thing to do is find out the point where the tire is punctured.
  2. Remove the tire from the car and also remove it from the rim for a clear look.
  3. When you locate the screw head, simply grab the plier and take it out.
  4. Now you can start by repairing the hole using a buffing solution. Take a small amount and rub it over the puncture.
  5. Buff the solution using sandpaper or a buffing machine and make sure to do that in a circular motion.
  6. Then using a tire radial patch, cover the puncture but make sure that only one-half of the hole should be covered by this patch.
  7. Using a tire chemical seal, cover the hole by spreading the liquid all around the tire radial patch. Then pull the radial patch to cover the entire hole, and the aluminum part of the patch should not be on the rubber,
  8. Use a sharp scissor to cut off any patch not covering the hole. Then using a repair tool and tire retread, roll over the patch so that it gets fixed more properly.
  9. Once this is done, simply put the rim back on the tire and inflate it again, and your screw puncture has been repaired.

How Long Can You Drive You Car with a Screw in the Tire?

Driving with a bolt in tire can be a very risky thing to do; as mentioned above, it can cause the tire to burst. However, this does not happen right away, and you can drive it from a few miles to take it to the repair shop. Now, this burst takes place if the puncture is on the sidewall of the tire. But with a screw in the tread of the tire and not anywhere near the sidewall, then you can drive for up to a maximum of 20 days. The entire drive with a screw-in depends on the location of the puncture. If the screw is very small, then you can drive for weeks without any issue, whereas with a larger screw, you may not even last a full day. In such puzzling situations, it is best to get the screw removed and the puncture fixed right away so you can avoid a disastrous consequence.

Frequently Asked Questions (FAQs):

Can A Screw In A Tire Be Repaired?

If the nail is present on the treads, then you will only require a quick patch-up without any replacement needed. However, If the nail penetrated towards the shoulder/sidewall of the tire, then a replacement will be necessary.

Can A Screw-In Tire Be Dangerous?

Absolutely! A screw-in tire can lead to many issues such as vehicle imbalance, bumpy and rough drive, and even a deflated tire in the middle of the road.

Does Fixing A Screw-In Tire Cost Much?

No, it doesn’t. A bolt in tire patch-up and fix cost a maximum of $20, and the price depends on which garage you opt for. Some even cost as low as $10, whereas some have a higher price point since they provide you with extra services such as vehicle alignment.

What To Do If There Is A Screw-In Tire?

If there is a screw-in tire, then you must immediately contact a car professional to deal with it. You can also drive to the repair shop for proper inspection and any necessary repairs needed. Avoid pulling the screw off on your own since you can ruin the entire tire if you do not do it correctly. But if the screw in tire between tread, then you can easily remove it and also patch it up without worry.

Can You Repair A Tire With A Screw-In?

Yes, a tire with a screw inside can be easily repaired, but again this depends on the location of the puncture. You can patch it up if the screw is on the tire’s treads but not if it is towards the sidewall.

Can You Repair A Tire With A Nail In The Sidewall?

No, as mentioned above, tire shoulder and sidewall is not repairable and will need replacing. The only tire repairable area includes the treads.


Screw and bolt in tires can be a very easy and also a very dangerous situation to deal with, but it is not something to lose sleep over. You must keep in mind that trusting a professional will allow you to deal with this mess in a proper way. If the screw is on the threads, then you won't need to replace the entire wheel but if it is towards the sidewall, then be prepared to spend a few extra bucks. At the end of the day, make it a habit to inspect your tires and the area around them for any screws or nails placed because precaution is better than cure!